BELIEVE  ACHIEVE  SUCCEED  
   
 
 
 
    
        

GED TEST PRE-REGISTRATION INSTRUCTIONS

 

All new GED examinees and those who have tested at other centers MUST pre-register in order to test (pre-registering is in addition to pre-scheduling with our office). You need Internet access to pre-register. The process should take 30 to 40 minutes. If you do not have Internet access, there are computers available at any public library.  A library card is required and can be obtained with a photo ID and proof of residency. If you do not have access to the Internet, please contact the Montrose Testing Center (970-249-2028) prior to the Friday deadline. Examinees MUST complete this process by the Friday before the test date. You will not be allowed to test if you have not completed the process. Please call 970-249-2028 if you need assistance.

 

1) Using an Internet browser, type www.ged123.org in the address bar. Then, under the heading “New & Potential GED Students” click on the “Begin” button. If you already have an access code, you should verify that your contact information is still correct.

 

2) On the map click on Colorado (“CO”).

 

3) If you are a first time tester and have not yet registered you do not have an access code, so leave the box blank and click “Continue.” OR If you have an existing log in, but need to update your information, enter your log in and password.

 

4) Fill out the form completely. Enter your e-mail and create a password. NOTE: Be sure to record your password and keep it in a secure place as you will need it for future reference. Be sure to spell everything correctly, as this is the information that will be printed on your answer sheets, and must match your government issued ID. Once you have completed the form click “Continue.”

 

5) You will need to open the e-mail from GED123.org for further instructions. The email will ask you to click on the link that says “Click Here.”

 

6) You will return to GED123.org and enter your e-mail address and password you were provided in the email and then click “Log In.”

 

7) Enter your social security number and click “Continue”

 

8) Continue through the next few pages and fill out the information completely.

 

9) Leave the “instructional center code” blank and continue to and read the privacy policy.  Answer “yes” or “no” to whether you want to be contacted regarding future research andclick “Continue.”

 

10) Congratulations! You have now completed the pre-registration process. In the upper left hand corner (under your name) is an access code. Please write this code down carefully and keep it safe, this access code will allow you to retrieve your scores once you have completed testing.

 

11) Click on “Proof of Registration” and print a copy to bring with you on your test date. You MUST also bring a valid government issued photo ID in order to test.

 
 

Updated:  January 2010